Honda CRF250RX Graphics Kit – Factory Works Red Series – Custom Race Number #139

Command the Track with the Honda CRF250RX Factory Works Red Graphics Kit

Transform your motorcycle into a factory team machine with the ultimate Honda CRF250RX graphic kit in Factory Works Red. Give your bike an unmistakable pro-racing aesthetic that demands attention at the starting gate and along the trail.

At Boondocks Decals, we construct graphics packages engineered to handle the toughest off-road environments. Whether you are navigating tight woods, blasting across open desert terrain, or tearing up deep loam tracks, our high-performance Honda CRF250RX decals are built to resist intense boot friction, branch scratches, flying roost, and high-pressure power washing. Explore our wide selection of custom race themes across our dedicated Honda Graphic Kits Collection to find the ideal setup for your build.

Why Upgrade Your Honda CRF250RX Decals?

Applying a heavy-duty Honda CRF250RX graphic kit serves as both an immediate styling upgrade and a vital protective barrier for your bike’s OEM plastics. Factory plastics are highly vulnerable to gouging, scuffs, UV degradation, and chemical etching from mud and pressure washers.

1. Unrivaled Plastic Armor: Ultra-thick off-road spec vinyl acts as a sacrificial shield against rocks, gravel, branches, and knee-brace wear, keeping original plastics in mint condition.
2. Authentic Factory Team Aesthetics: Classic HRC-inspired red, white, and blue race styling featuring prominent race number #139 gives your bike a factory rider look.
3. Fade-Resistant UV Defense: Advanced UV-stable inks prevent vibrant racing red and deep blue sections from fading or yellowing after long hours of direct sunlight.
4. Resale Value Preservation: Preserving your stock bodywork underneath thick, protective vinyl ensures maximum value retention for future resale or trade-ins.

Comprehensive Component Breakdown

Our Honda CRF250RX race graphics package is computer-cut with laser precision to ensure an exact fit over every plastic curve, bolt hole, and panel seam.

1. Radiator Shrouds

The radiator shroud graphics serve as the focal point of this kit.

2. Front and Side Number Plates

Display your racing identity clearly with matching front and side number plates. The front plate features race number #139 with rider name CIARAN BARTLEY and HRC badging against a high-contrast white and blue backdrop. The side panels wrap smoothly across the airbox and side number plates for a continuous racing line from front to rear.

3. Front Fender

The front fender section provides full top deck and arch coverage. Designed with vivid red base vinyl, subtle white side striping, and Akrapovič and Pro Honda accents, it is constructed to withstand direct roost impacts, mud spray, and gravel without lifting along the leading edge.

4. Rear Fender & Tail Section

Built to withstand rear deck friction, seat contact, and heavy mud accumulation.

5. Lower Fork Guards

Protect your lower suspension tubes against severe rock pitting, gravel impacts, and mud buildup. During fork guard installation, keep your hardware securely tightened using reliable adhesives like Loctite Threadlockers.

6. Swingarms

Complete your chassis detailing with heavy-duty swingarm decals. Upgrade your drivetrain setup with durable sprockets and drive components from Supersprox for uncompromising reliability.

Component Breakdown & Coverage Table

Professional Grade Material Engineering

• Ultra-Thick Spec Vinyl: Formulated using high-durability polymeric PVC that provides exceptional flexibility during application and superior tear resistance under crash conditions.
• AIR-RELEASE Micro-Channel Technology: Embedded micro-channels in the adhesive backing allow trapped air to escape easily during application, delivering a clean, bubble-free finish.
• Aggressive Hi-Tack Adhesive: Engineered specifically to form a long-lasting bond on textured, hard-to-stick low-surface-energy dirt bike plastics.
• High-Gloss Armor Overlaminate: Finished with a thick, clear gloss protective overlaminate shield that guards against fuel spills, UV fading, chemical cleaners, and deep scratches.

Step-by-Step Installation Guide

Achieving a smooth, bubble-free installation for your Honda CRF250RX dirt bike stickers is simple when following these structured steps:

Step 1: Surface Preparation & Cleaning

Thoroughly wipe down all plastic panels with isopropyl alcohol or contact cleaner. Remove all dirt, oil, silicone polish, and glue residue. Wipe dry with a clean microfiber towel.

Step 2: Dry Fit & Alignment

Position each decal onto the corresponding plastic panel with the backing paper attached. Check alignment around bolt holes, body lines, and outer edges. Secure one edge with painter’s tape to form an alignment hinge.

Step 3: Squeegee Application

Peel back a small section of the backing paper (2–3 inches). Align the exposed adhesive edge with your plastic panel reference point. Using a felt-edge squeegee or firm thumb pressure, press the graphic down smoothly, moving from the center outward. Gradually remove the remaining backing paper as you work across the panel.

Step 4: Heat Shaping & Conformance

For curved areas like the front fender or radiator shrouds, use a heat gun or hairdryer on a low setting to warm the vinyl gently. Warming renders the graphic pliable, allowing it to conform smoothly around complex curves without stretching or distorting the design pattern.

Step 5: Post-Heating Seal

Once all panels are applied, pass a heat gun over the entire graphic kit (around 150°F / 65°C) while pressing down firmly on all edges with a soft cloth. This post-heating step fully activates the hi-tack adhesive and sets the vinyl memory to prevent edge lifting.

Compatible Accessories & Maintenance Tips

• Pressure Washing Caution: When washing your bike, avoid pointing high-pressure water wands directly at the thin edges of decals at close range. Maintain a distance of 12–18 inches and spray across panels rather than under the edges.
• Chemical Safety: Avoid spraying aggressive caustic degreasers or solvent-based shine products directly onto graphic borders. Wash with mild automotive soap and warm water.
• Gripper Seat Covers & Frame Guards: Pair your new graphics kit with a red or blue gripper seat cover and durable frame guards to protect graphic edges from heavy riding boot abrasion.

Product Summary Specifications