Yamaha YZ450FX Pro Motocross Red Custom Graphics Kit

Whether you are blasting through tight forest trails or charging down the main start straight, your YZ450FX will command absolute attention.

At Boondocks Decals, we manufacture every single graphic package to withstand the brutal abuse of high-speed off-road racing. Our extensive selection of Yamaha Motocross Graphics Kits represents the gold standard of modern dirt bike surface defense and visual engineering.

Riding without dedicated graphic shielding allows roost, mud, and boot friction to scuff and ruin your motorcycle’s expensive plastics.

• Heavy-Duty Fairing Armor: Thick 21 mil armored vinyl protects your plastics against deep gouges, flying rocks, tree branches, and heavy knee-brace wear.
• Tailored Race Identification: Personalize your race numbers, rider name, and background colors across every major body panel for clear timing visibility.
• Retain Motorcycle Resale Value: Shield your original OEM plastics against sun fading, scuffs, and chemical staining, preserving higher secondary market value.
• Aggressive Red Factory Style: Bold crimson color accents and iconic claw graphics ensure your motorcycle stands out in photos, paddock displays, and starting gate lineups.

Advanced Material Engineering & Durability

1. 21 Mil Armored Laminate: Engineered by bonding a high-tack, solvent acrylic adhesive layer to a tough, flexible clear top coat capable of absorbing severe impacts without tearing.
2. Air-Egress Adhesive Channels: Built-in micro channels inside the adhesive layer allow trapped air pockets to sweep out effortlessly during installation, ensuring a smooth, bubble-free result.
3. Vibrant Fade-Resistant Printing: Ultra-HD ink technology provides deep blacks, vivid crimson reds, and clean highlights that resist fading under continuous UV exposure and high-pressure washing.
4. Digital Precision Template Matching: Each panel is digitally die-cut to fit the specific contours of your Yamaha plastics, eliminating manual trimming and misaligned edges.

Full Coverage Panel Breakdown

Radiator Air Shrouds

Front Mask & Side Airbox Plates

Keep your race identification prominent. High-contrast typography ensures your race number and rider name remain easily readable by race marshals, transponder scoring systems, and spectators.

Front Fender Set

Tailor-contoured graphics cover both the fender tip and arch, tying together front-end styling while protecting the plastic from direct roost impacts and stone chips.

Rear Fender & Tail Section

Protect your rear tail piece from mud buildup and boot scuffs. Tapered graphic lines extend cleanly toward the tip for a streamlined rear profile.

Lower Suspension Fork Guards

Protect fragile lower fork tubes against flying rocks and track debris.

Rear Swingarm Wraps

Product Coverage Breakdown Table

Step-by-Step Installation Guide

1. Surface Prep: Wash plastic fairings thoroughly with warm soapy water to clear dirt. Clean with isopropyl alcohol or contact cleaner to remove wax, oil, and silicone residue.
2. Dry Fitment Check: Align each graphic piece against its panel prior to removing the backing paper. Take note of bolt holes, fairing edges, and curves.
3. Anchor First Corner: Peel back approximately 2 inches of backing paper. Align the decal with key reference points on the plastic and firmly press down the exposed corner.
4. Squeegee Outward: Slowly peel away the remaining backing paper while smoothing the decal down with a vinyl squeegee, working from the center outward to push out air bubbles.
5. Apply Gentle Heat: Use a low-temp heat gun or hair dryer on curved contours. Softened vinyl stretches slightly to conform around tight fairing bends.
6. Post-Heat Press & Cure: Firmly press down all outer edges with warm thumb pressure. Allow the adhesive system to cure undisturbed for 24 hours at room temperature before riding.

Maintenance & Care Guidelines

• Pressure Wash Distance: Maintain at least 12 to 18 inches of distance when using pressure washers to avoid lifting graphic edges.
• Cleaning Products: Wash fairings with mild bike wash soaps. Avoid harsh degreasers, solvent cleaners, or abrasive sponges on decal surfaces.
• Chemical Caution: Do not spray silicone dressings, chain lubes, or detailers directly onto graphic seams where chemicals could degrade adhesive backing.
• Indoor Storage: Keep your bike parked inside a garage or under an opaque cover to shield graphics from prolonged UV sunlight exposure when not in use.

Technical Product Specifications