Yamaha YZ450FX Custom Motocross Full Coverage Apex Graphics Kit

Engineered for racers, weekend warriors, and freestyle riders who demand perfection on and off the track, this kit brings together striking aesthetic appeal and heavy-duty protective performance. When you are blasting through tight wooded trails or tearing up the main track layout, your bike deserves a bold visual footprint that stands out from the competition.

At Boondocks Decals, we engineer every single decal set to withstand the harshest track and trail conditions. Our lineup of Yamaha Motocross Graphics Kits represents the pinnacle of modern off-road aesthetic technology.

Stock motorcycle plastics fade, scratch, and wear out quickly under intense off-road riding.

• Maximum Plastic Protection: High-impact vinyl protects expensive OEM and aftermarket plastics from deep gouges, friction wear, and sun fading.
• Custom Race Identity: Display your custom rider number, race team branding, and personalized color preference effortlessly across all main body panels.

Professional Grade Material & Engineering Excellence

Standard vinyl stickers simply cannot withstand the rigorous demands of motocross and hard enduro riding.

1. Ultra-Thick 21 Mil Protection Layer: Composed of an aggressive high-bond adhesive layer fused with a thick, flexible clear laminate top coat.
2. Air-Release Technology: Advanced micro-grooved adhesive channels allow trapped air to escape easily during application, guaranteeing a smooth, bubble-free finish every single time.
3. Vibrant UV-Resistant Inks: High-definition digital printing yields deep contrast blacks, vivid race accents, and sharp highlights that will not fade under harsh sunlight or heavy power washing.
4. Precision Die-Cut Fitment: Every piece is digitally cut to perfectly match the contours of your motorcycle’s plastic layout, eliminating the need for trimming during installation.

Comprehensive Component Breakdown

Radiator Shrouds

The main focal point of your bike’s design.

Front and Side Number Plates

Keep your race identity front and center. The front plate decal and side panel graphic wraps offer clean typography for your race number and rider name, optimized for maximum legibility by track officials and transponder scoring systems.

Front Fender

Custom-contoured front fender graphics cover both the tip and arch, tying together the aggressive front-end styling while protecting the plastic from direct roost impacts.

Rear Fender & Tail Section

Shield your rear fender from mud buildup and boot scuffs. The rear fender design features flowing lines that taper neatly toward the tip, presenting a clean view for riders behind you.

Lower Fork Guards

Protect lower fork tubes from flying stones and track debris.

Swingarms

Add a factory race-team aesthetic to your driveline area.

Detailed Component Breakdown Table

Step-by-Step Installation Guide

1. Surface Preparation: Thoroughly wash all plastic panels with warm soapy water to remove heavy dirt. Follow with isopropyl alcohol or a dedicated contact cleaner to remove grease, wax, and silicone residue. Do not use petrol or harsh solvent cleaners.
2. Dry Fitment Test: Align each graphic piece against the corresponding plastic panel before removing the backing paper. Familiarize yourself with edges, mounting holes, and contours.
3. Peel and Position: Peel back a small section (2–3 inches) of the backing paper from one corner. Align the decal with key reference points (such as bolt holes or plastic edges) and press the exposed adhesive into place.
4. Squeegee Application: Gradually peel the remaining backing paper while smoothing the graphic down using a vinyl squeegee or a soft microfiber cloth, working from the center outward to push out air bubbles.
5. Heat Activation: Lightly warm curved sections using a low heat gun or hair dryer. This softens the 21 mil vinyl, allowing it to stretch slightly and conform perfectly around complex curves.
6. Final Post-Heat & Cure: Go over all edges and surfaces with gentle heat and firm thumb pressure. Allow the graphics to cure at room temperature for 24 hours before riding or washing.

Compatible Accessories & Maintenance Tips

• Pressure Washing Precaution: Avoid pointing high-pressure water nozzles directly at graphic edges at close range. Keep the wash nozzle at least 12–18 inches away.
• Cleaning Solutions: Use mild motorcycle wash soap. Avoid harsh degreasers, acid-based wheel cleaners, or abrasive scrub pads on the decal surface.
• Plastic Restorers: Do not spray silicone-based detailers directly onto graphic edges where they might penetrate the adhesive layer.
• Storage Protection: Store your motorcycle inside a garage or under a breathable cover to protect graphics from prolonged UV radiation and extreme temperature fluctuations when not in use.

Product Summary Specifications